Trusted Home — Replacement Windows
Replacement windows contractors in Los Angeles & Orange County — dual-pane, Low-E, retrofit and full-frame window replacement, field-measured, flashed, permitted, and warrantied.
A window is a hole in the wall you have to keep weather, heat, and noise out of. The unit matters. What happens at its edges matters more.
As replacement windows contractors in Los Angeles & Orange County, we start at the opening. Every job begins with a field measure of each window, a look at the frames, sills, and stucco, and a straight answer on retrofit inserts versus full-frame replacement. Then we match the glazing package to the elevation, flash and seal properly, patch stucco and trim to blend, and pull the permit with Title 24 documentation. Family-run since 1978 and licensed under CSLB #313596, we replace windows and patio doors — including arched, casement, and period profiles — from the Valley and the Westside through Pasadena, Long Beach, Irvine, and Newport Beach.
Start your projectWe'll measure every opening, look at the frames, sills, and stucco, and send a written estimate with the glazing package each elevation actually calls for. No obligation, no sales script.
Broken or unsecured window? Call us directly.
Two identical windows can perform decades apart depending on how the opening was prepared, flashed, sealed, and finished. Leaks and drafts are almost always installation, not product.
Every rough opening measured three ways and checked for square. Ordering off one number is how you end up with shims, foam, and a gap hidden behind trim.
Retrofit inserts when the existing frame is sound; full-frame replacement when stucco, sill, or framing is damaged. We tell you which one the wall calls for, not which one is faster.
Low-E coatings and glazing packages selected by orientation — west-facing rooms take the heat load, north-facing rooms shouldn't be darkened for nothing.
Pan flashing, backer rod and sealant, stucco patched and textured to match, permit pulled and Title 24 documentation handed to you in writing.
We'll measure every opening, check the frames and sills, and tell you which approach the wall calls for — free, with no obligation.
We measure every opening ourselves before anything is ordered, so the windows fit the house instead of the house being cut to fit the windows.
Arches, casements, steel-look profiles and divided lites matched on period homes — new performance without flattening the elevation.
Dual-pane, Low-E, properly sealed units cut street noise and afternoon heat gain — the difference you actually feel and hear.
CSLB #313596, pulled permits, Title 24 compliance, and a written warranty covering both product and labor.
Openings never left open overnight, floors and furniture covered, stucco and trim patched, old units hauled away.
Call (844) 842-4663 and speak with the team doing the work — not a call center.
Most retrofit vinyl or fiberglass replacements run roughly $800 to $1,600 per window installed; aluminum-clad wood, steel-look, and custom-shape units run higher, and full-frame replacement with stucco repair adds labor. Whole-house projects typically land between $10,000 and $40,000. Every estimate we send is line-itemed per opening.
Retrofit installs a new window inside the existing frame — faster, less patching, ideal when the frame and sill are sound. Full-frame removes everything down to the rough opening, which is the right call when there's water damage, rot, dry-rotted sills, or you're changing the size or shape.
Yes, when the glass is specified for the elevation. Dual-pane Low-E units cut solar heat gain on west and south walls, and laminated or dissimilar-thickness glass measurably drops traffic noise. Poorly sealed installs give back most of that benefit, which is why we treat flashing and sealant as part of the product.
Yes. Window replacement is permitted work in most Los Angeles and Orange County jurisdictions. We pull the permit, supply Title 24 compliance documentation, and see the inspection through — it protects your warranty, your insurance, and your resale.
Installation is usually one to three days for a typical house once the windows arrive. The wait is manufacturing — four to eight weeks for standard sizes, longer for custom shapes and specialty finishes. No opening is ever left open overnight.
We do it regularly — arched heads, divided lites, casements, and steel-look profiles in modern high-performance frames, so the elevation keeps its character while the house stops leaking heat.
Read what Los Angeles and Orange County homeowners say about their new windows — our reviews and our record are public.
Many projects pull from more than one capability. Here's the rest of what the studio handles in-house.
The house treated as a single instrument — light, line, and material composed across every threshold.
The two rooms you use most, designed around how the day actually moves through them.
Paint as a finish, not a coverup — proper prep, the right system, brushed and tipped-off by hand.
Detached units, attached additions, JADUs, and SB-9 lot splits — California's legal paths to more home.
Tile, metal, composition, slate, and low-slope — the full assembly, properly flashed, warrantied.
Air conditioning, furnaces, heat pumps, and ductwork — sized to the house, permitted, and commissioned in writing.
